Grounding bolts pressed in (24 to 48 VDC)
Figure 10-19 Example of a XR324-4M EEC (1 x 24 VDC, cable outlet front)
Grounding bolt
Mounting the IE Switch X‑300EEC
CAUTION
Making a mounting support
Suitable mounting supports are necessary for wall mounting and 19" rack mounting. Have
these made according to the drawing.
You will find other accessories, such as screws in the tables. If you have questions, contact
our Customer Support.
You will also find dimension drawings on the Internet on the pages of Siemens Industry
Automation Customer Support under the following entry ID:
33118441 (http://support.automation.siemens.com/WW/view/en/33118441)
→ "Entry list" tab
Graphics
10.5 XR-300M EEC dimension drawings
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24 235
To Next Page
Loading...
