Siemens SIMATIC ET 200eco PN - Page 212

IO-Link Master
11.1 IO-Link Master (6ES7148-6JA00-0AB0)
ET 200eco PN
212 Operating Instructions, 08/2016, A5E01250250-AJ
Technical data
Number of ports that can be controlled simulta-
neously
4, in all mounting positions
IO-Link protocol 1.0 Yes
IO-Link protocol 1.1
No
Transmission rate 4.8 kBaud (COM1), 38.4 kBaud (COM2)
Size of the process data, input per port
32 bytes
Size of the process data, input per module
32 bytes
Size of the process data, output per port
32 bytes
Size of the process data, output per module
32 bytes
Digital inputs
Number of inputs
8
Number of inputs that can be controlled simulta-
neously
8, in all mounting positions
Digital outputs
Number of outputs
4
IO-Link Device selection data (Port 1 to 4)
Cable length, unshielded
Max. 20 m
Connection of IO-Link devices
Port type A
Yes; with 3-wire cable
Operating modes
IO-Link
Yes
DI
Yes
DQ Yes
Sensor selection data (input signals 0 to 7 only)
Cable length, shielded Max. 30 m
Cable length, unshielded
Max. 30 m
Input voltage
• Nominal value
DC 24 V
• For signal "1"
11 to 30 V
• For signal "0"
-3 to 5 V
Input current
• At signal "1"
Typ. 7 mA
Input delay
• At "0" to "1"
Typ. 3 ms
• At "1" to "0"
Typ. 3 ms
Input characteristic
According to IEC 61131, Type 3
Connection of 2-wire proximity switches
Supported
• Permitted quiescent current
Max. 1.5 mA