Siemens SIMATIC ET 200pro - Page 185

Repair
10.1 Replacing the ET 200pro FC-2
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
185
5. Remove the memory card from the card reader at the rear of the
converter.
6. Fit the memory card into the new converter.
7. Fix the converter to the DIN rail using the eight fixing screws.
Notes:
• The weight of the converter must be supported during the
fixing process to ensure that the converter is fitted correctly to
the DIN rail.
• The torque for the fixing screw is: 1.5 Nm