Introduction
2.2 Guide through this manual
SIMATIC ET 200pro FC-2 converter
20 Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
Guide through this manual
Inverter components and accessories.
Install and wire the inverter and its components.
Configure the ET 200pro station with the inverter.
Prepare for commissioning.
Restore the inverter to factory settings.
Define the inverter’s basic settings.
Configure communication via PROFIBUS or PROFINET.
Set up the functions, e.g. setpoint processing, motor control
and protection functions.
’s settings to an external data storage
medium, e.g. a memory card or an operator panel.
and its components.
Meaning of the LEDs on the front of the inverter.
The most important technical data of the inverter.
Setting up the new inverter functions.
To Next Page
Loading...
