Siemens SIMATIC ET 200pro - 1.3 Limitation of connectable modules; maximum configuration

Description
3.3 Motor series that are supported
SIMATIC ET 200pro FC-2 converter
26 Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
3.3
Motor series that are supported
Supported motors
Table 3- 4 Motor series suitable for the inverter
SIMOTICS GP, SIMOTICS SD IEC motors
1LG6, 1LA7, 1LA9 and 1LE1 standard induction
motors
Multi-motor drive is permissible, i.e. multiple mo-
tors operated on one inverter. See also: Multi-
motor drive
(http://support.automation.siemens.com/WW/view/
en/84049346).
Motors from other manufacturers
Standard induction motors