Siemens SIMATIC S5 ET 200U - Coding the I;O Modules in an et 200 U(DP Standard;Fms)

6-16
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
Table 6-10 Coding the I/O Modules in an ET 200U(DP Standard/FMS)
Order No. of
Module
Type Length Access
Mode
1
Object
Code
2
Delay
(ms)
Current
Con-
sumption
(mA)
Power
Loss
(W)
Analog input modules 6ES5 ...:
464–8MA11
3
1–channel: 2 R 1–ch.: 1–ch.: 70 0.7
464–8MA21
3
unsigned16 7 60 100 0.7
464–8MB11
3
2–channel: 2–ch.: 2–ch.: 70 0.7
464–8MC11
3
2unsigned16 8 120 70 0.7
464–8MD11
3
4–channel: 4–ch.: 4–ch.: 70 0.7
464–8ME11
3
4unsigned16 8 240 70 0.7 to 1
464–8MF11
4
1–channel: 2 R 1–ch.: 1–ch.:
70 0.9
unsigned16 7 60
464–8MF21
4
2–channel: 2–ch.: 2–ch.:
100 0.9
2unsigned16 8 120
466–8MC11 2unsigned16 2 R 8 120 100 0.9
467–8EE11
4
1–channel:
unsigned16
2 R 1–ch.:
7
1–ch.;
60
320 0.7 to 3
2–channel:
2unsigned16
2–ch.:
8
2–ch.:
120
Analog output modules 6ES5 ...:
470–8MA11 2unsigned16 2 R/W 8 0.1 3.1
470–8MA12 2unsigned16 2 R/W 8 0.15 3.1
470–8MB11 2unsigned16 2 R/W 8 0.1 3.8
470–8MB12 2unsigned16 2 R/W 8 0.15 3.8
470–8MC11 2unsigned16 2 R/W 8 0.1 3.8
470–8MC12 2unsigned16 2 R/W 8 0.15 3.8
470–8MD11 2unsigned16 2 R/W 8 0.1 3.1
470–8MD12 2unsigned16 2 R/W 8 0.15 3.1
470–8MD21 2unsigned16 2 R/W 8
477–8EC11 2unsigned16
*
2
*
R/W 8 350 3.2
* Since this module has both inputs and outputs, an “input” and an “output” object are generated.
1 Meanings of abbreviations: R = Read (read access) und W = Write (write access).
2 Meanings of the abbreviations: 7 = Simple–Variable, 8 = Array. The FMS master can access an array element via a
subindex.
3 These analog modules can be operated with one channel, two channels or four channels.
4 These analog modules can be operated with either one channel or two channels.
ET 200U(DP Standard/FMS): Modes, Settings and Comm. Capabilities of IM 318–C