Siemens SIMATIC S5 ET 200U - 4.2 Starting Up and Testing with COM ET 200 for ET 200 U(DP Siemens)

4-17
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
4.2 Starting Up and Testing with COM ET 200 for ET 200U(DP Siemens)
The following describes
 How the station number and switch 8 are set ( Section 4.2.1)
 How you connect the ET 200U to the programmer ( Section 4.2.2)
and
 How you use the COM ET 200 “START–UP/TEST” screen
( Section 4.2.3).
In this Section
ET 200U(DP Siemens): AddressAssignment,Starting–Up,Diagnosing Faults Using COMET200