Siemens SIMATIC S5 ET 200U - Two-Wire Connection of a Lamp to Channel

3-18
ET 200U Distributed I/O Station
EWA 4NEB 812 6087–02b
Figure 3-14 illustrates the following example for connecting a lamp to a
four–channel output module:
Example: A lamp is connected to an output module with start address 1.0.
The lamp is connected to channel 2 (address Q 1.2).
13579
24 6 810
Channel 2
L+ M Lamp
Figure 3-14 Two–Wire Connection of a Lamp to Channel 2
Connecting Four–
Channel Output
Modules
Mechanical and Electrical Configuration