Logic Modules
13.2 Counter
SIMOCODE PRO V PN FDI
118 Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
13.1.12.5 Logic Output 2 (I1 is 0)
Logic Output 2 (I1 is 0)
If input 1 = 0 you can select the input conditions for which you want to generate an output
signal from 16 possible input conditions.
13.1.12.6 Logic Output 2 (I1 is 1)
Logic Output 2 (I1 is 1)
If input 1 = 1 you can select the input conditions for which you want to generate an output
signal from 16 possible input conditions.
13.2 Counter
13.2.1 Counter
Counter
Counters are integrated in the SIMOCODE pro system. These are activated via the plugs
"Input +" or "Input -".
The Counter output switches to "1" when the preset limit is reached. The Counter is reset
with "Reset".
The actual value is available as a socket for further processing and can also be transmitted
to the automation system.
● Input +: increases actual value by 1 (maximum: limit value)
● Input -: decreases the actual value by 1 (minimum: 0)
● Reset: resets the actual value to 0.
The Counter consists of:
● 3 plugs (input +, input - and reset)
● 1 logic component
● 1 socket (Counter Output)
● 1 "Actual Value" analog socket with the current value in the range between 0 and the
limit. It remains even if there is a voltage failure.
To Next Page
Loading...
Need help?
General
