Siemens SIMOCODE 3UF User Manual

Logic Modules
13.10 Analog Multiplexer
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
129
Settings
Calculator 3/4
Description
Input
Any analog value
Output
Calculated analog value
Constant 1 to 4
Any analog value
Range: 0 - 65535
Operator 1 to 3
•
"+": Addition
•
"-": Subtraction
•
"*": Multiplication
•
"/": Division
Priority 1 to 3
•
Medium
•
High
•
Low
Formula
Output = Input 1 [Operator 1] Input 2 [Operator 2] Input 3 [Operator 3] Input 4.
13.10 Analog Multiplexer
Analog Multiplexer
Description
The analog multiplexer (for the SIMOCODE pro V PN and SIMOCODE pro V PN GP basic
unit only) outputs one of four possible analog values Input 1 to Input 4 at the output,
depending on the control signals S1 and S2.
If you interconnect the input to "Fixed level", the input is assigned the constant "Const x" (x =
1 - 4). In this case, the respective edit field for the constant is activated.
You can enter a value between 0 and 65535.
The "Analog Multiplexer" function block consists of:
● 2 digital plugs (control signal 1 and 2)
● 4 analog plugs (Input 1 to 4)
● 1 analog socket (Analog Multiplexer Output)
● Logic.

Siemens SIMOCODE 3UF Specifications

General

Brand	Siemens
Model	SIMOCODE 3UF
Category	Control Systems
Language	English