Siemens SIMOCODE 3UF User Manual

Online Settings and Displays
17.5 Measured Values
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
147
17.5 Measured Values
Measured Values
In dialogue "Measured Values > Measured Values" the following measured values are
shown.
Current
Range
Unit
Max. Current I_max
0 to 65535
% I
s
Current I_L1
0 to 65535
% I
s
Current I_L2
0 to 65535
% I
s
Current I_L3
0 to 65535
% I
s
Last Trip Current
0 to 65535
% I
s
Phase Unbalance
0 to 100
% (100 % corresponds to the
failure of a phase)
Further Information on the set current I
s
can be found under Overload Protection.
Thermal Motor Model
Range
Unit
Thermal Memory
0
to 255
%, related to symmetrical
tripping level Representation
in 2
-%-
stepsin bits 6...0 (range
of values 0 to 254 %); Bit 7
indicates unbalance(firm level
50 %)
Cooling Down Period
0 to 6553.5
s
Time to Trip
0 to 65535
s
(The motor is not at
present in
an overload situation. Under
current load conditions the
motor is switched off however
in x seconds because of
overload.)
Voltage
Range
Unit
Phase voltage UL1-N
0 to 65535
V
Phase voltage UL2-N
0 to 65535
V
Phase voltage UL3-N
0 to 65535
V
Line-to-line voltage UL1-L2
0 to 65535
V
Line-to-line voltage UL2-L3
0 to 65535
V
Line-to-line voltage UL3-L1
0 to 65535
V

Siemens SIMOCODE 3UF Specifications

General

Brand	Siemens
Model	SIMOCODE 3UF
Category	Control Systems
Language	English