Siemens SIMOCODE 3UF User Manual

Logic Modules
13.11 Pulse width modulator
SIMOCODE PRO V PN FDI
130 Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
Settings
Analog Multiplexer
Description
Control signals S1/S2
Activation by any signal (any sockets , e.g., device inputs, control
bits from PROFINET, etc.).
Input 1 to 4
Any analog value or "Fixed level"
Output
Output value according to panel (see below)
Constant 1 to 4
Any analog value
Range: 0
- 65535
13.11 Pulse width modulator
Pulse width modulator
Description
The pulse width modulator (for basic unit SIMOCODE pro V PN and SIMOCODE pro V PN
GP only) modulates the analog input value "PWM Input" to a digital pulse output signal
"PWM Output". The pulse width is proportional to the "PWM Input" analog value.
If you interconnect the input to "Fixed value", the input is assigned the parameterized
constant "Input (const)". In this case, the edit field for the constant is activated.
You can enter a value between 0 and 65535.
The "Pulse Width Modulator" function block consists of:
● 1 analog plug (input)
● 1 digital socket (PWM output)
● logic.
Settings
Pulse Width Modulator
Description
Input
Activation by any analog signal or "Fixed value"
Constant input
Any constant; range: 0 ... 65535 (Default Value: 0)
Input minimum
Any constant; range 0 ... 65535 (Default Value: 0)
Input maximum
Any constant; range 0 ... 65535 (Default Value: 0)
Time period
0.2 - 6553.5 s (Default Value: 2s)

Siemens SIMOCODE 3UF Specifications

General

Brand	Siemens
Model	SIMOCODE 3UF
Category	Control Systems
Language	English