Monitoring Functions
9.7 Operating Hours Monitoring
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
63
9.7.2 Motor Operating Hours Monitoring
Motor Operating Hours Monitoring
The Motor Operating Hours monitoring function enables the operating hours (service life) of
a motor to be recorded so that motor maintenance prompts can be generated in good time
as applicable.
Level (CiR)
If the operating hours exceed the set Response Level, the Monitoring function will be
activated.
Response
You can set the response for overshoot here:
9.7.3 Motor Stop Time Monitoring
Motor Stop Time Monitoring
System parts for important processes often have dual drives (A and B drives). Ensure that
these are always operated alternately. This prevents long Motor Stop Times and reduces the
risk of non-availability. The motor stop time monitoring function can be used, for example, to
generate an alarm, thus initiating connection of the motor.
Level (CiR)
The length of the permissible motor stop time is stipulated here, if exceeded, monitoring will
begin.
to 65535 hours
Activity
Unless deactivated, this function is always active, independent of whether the motor is
running or not (operating state "on").
To Next Page
Loading...
Need help?
General
