Online Settings and Displays
17.13 Test Online
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
167
17.13 Test Online
Test Online
Test
In this dialog box, you can;
● Select device-internal outputs (sockets) and show logic conditions
● Select device-internal inputs (plugs) and set their input signal 0 or 1
● Show the logic conditions of the device-internal inputs (plugs).
This procedure can, for example, be used to test the functioning of truth tables.
Read and set analog function block - input
In this dialog box, you can select the device-internal inputs (plugs) and set their input signals
0 or 1.
Function Block - Select Output
In this dialog box, you can select device-internal outputs (sockets).
Function Block - Read Output
In this dialog box, you can select device-internal outputs (sockets) and show logic conditions.
Function Block - Read and Set Input
In this dialog box, you can select device-internal inputs (plugs) and set their input signals 0
or 1.
17.14 Hardware inputs and outputs
Hardware inputs and outputs
The "Hardware inputs and outputs" dialog displays the current status of the modules.
To Next Page
Loading...
Need help?
General
