Siemens SIMOCODE 3UF User Manual

Online Settings and Displays
17.6 Service Data - Statistical Data
SIMOCODE PRO V PN FDI
150 Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
17.6 Service Data - Statistical Data
Service Data - Statistical Data
The following values are shown in the Motor section:
Motor
Range
Motor operating hours
0 to 1193046 h
Number of overload trips
0 to 65535
Number of starts
0 to 4294967295
Permissible starts - actual value
0 to 255
Just one start possible
See Warnings.
No start
possible
See Warnings.
Motor stop time
0 to 65535 h
Motor stop time >
See Warnings.
Time until test required
0 to 255 w (weeks)
Test required
See Warnings, DM-F Test requirement.
By specifying "Motor operating hours" and "Number of starts", for example, you can decide
whether motor and/or motor contactors should be replaced. To change these values enter a
new value in the right hand input field and press "Set". The value is accepted by the device.
Basic Unit
Range
Description
Device
operating hours
0 to 1193046 h
indicate, how long voltage supply of
SIMOCODE pro was switched on.
Further information: Error Buffer
-
Error
Protocol.
Module time:
•
Date
•
Time
Time information for the unbuffered
real time clock (only in conjunction
with SIMOC
ODE pro V PN basic unit).
The real time clock can be
synchronized using an
NTP server or via Target System
->
Command.
Time shift
Configured time difference between
module time and UTC (Universal
Time Coordinated) (only in
conjunction with
SIMOCODE pro V PN basic unit)
Int. number of parametrizations
0 to 65535

Siemens SIMOCODE 3UF Specifications

General

Brand	Siemens
Model	SIMOCODE 3UF
Category	Control Systems
Language	English