Siemens SIMOCODE 3UF - Page 149

Online Settings and Displays
17.5 Measured Values
SIMOCODE PRO V PN FDI
Programming and Operating Manual, 05/2020, A5E44499659002A/RS-AA/001
149
When SIMOCODE pro V(PN) is configured and connected with a current/voltage
measurement V2 following float values are displayed in addition to available readings.
Current (Float Values)
Unit
Max. Current I_max
A
Current I_L1
A
Current I_L2
A
Current I_L3
A
Average Current
A
Frequency
Hz
SIMOCODE pro V with a current/voltage measurement module is necessary for voltage
measurements.
Line-to-line Voltage (Float values)
Unit
Current I_L1
V
Current I_L2
V
Current I_L3
V
Power/Power Factor (Float Values)
Unit
Active Power P
W
Apparent Power S
VA
Cos
-phi
0/1 (1 when no motor current is flowing and/or
no voltage is measured)