Siemens SIMOCODE DP User Manual

Parameter S7_shortcut S7_unit S7_string_0 S7_string_1
CUR CUR %  
CUR_AH HH alarm   
CUR_WH H alarm   
CUR_WL L alarm   
CUR_AL LL alarm   
EM_START   Emerg. Start=OFF Emerg. Start=ON
HYS Hysteresis   
M_SUP_C   Enable Cur Alarm Suppr. Cur Alarm
M_SUP_EXT   Enable Ext.Alarm Suppr. Ext.Alarm
M_SUP_SIMO   Enabl.SIMO Alarm Suppr SIMO Alarm
MANON_OP   Station=OPERATOR Station=LINKED
MO_PVHR Bar UL   
MO_PVLR Bar LL   
MONITOR   Monitoring=OFF Monitoring=ON
MSG_LOCK   Enable Alarms Suppr. Alarms
N_OVL No. OVL Trips   
N_OVL_S No. OVL Trips   
N_STRT No. of Starts   
N_STRT_S No. of Starts   
OFF_OP   0 Command=OFF
ON1_OP   0 Command=ON1
ON2_OP   0 Command=ON2
OPH Operating Hours X 10h  
OPH_S Operating Hours X 10h  
REMON_OP   Operation=LOCAL Operation=REMOTE
RESET   0 Mon. Err=RESET
SD_UPD   0 StatData=Update
SENSOR Sensor Value Ohm  
SIMORESET   0 SIMO Fault=RESET
TIME_CLASS Class Time S  
TIME_MON Mon. Time S  
TRIP_CUR Trip Current %  
LOCK_OPT   ON2 ON1
SS_POS   OFF ON2
QON1   0 ON1
QOFF   0 OFF
QON2   0 ON2
SIMO_CHN Function
4.3AS block parameters in the CFC
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
52 Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003

Siemens SIMOCODE DP Specifications

General

Brand	Siemens
Model	SIMOCODE DP
Category	Industrial Equipment
Language	English