VSTATUS Bit_22:=Q1_4; VSTATUS Bit_06:=QOVL;
VSTATUS Bit_21:=Q1_5; VSTATUS Bit_05:=QADD_F1;
VSTATUS Bit_20:=QMAN_AUT; VSTATUS Bit_04:=QADD_F2;
VSTATUS Bit_19:=QREMOTE; VSTATUS Bit_03:=Q1_6;
VSTATUS Bit_18:=QCST; VSTATUS Bit_02:=Q1_7;
VSTATUS Bit_17:=QSIM; VSTATUS Bit_01:=QMON_ERR;
VSTATUS Bit_16:=LOCKED; VSTATUS Bit_00:=QMAN_MOP;
VSTATUS1 Bit_31:=QAUTOP; VSTATUS1 Bit_15:=not used;
VSTATUS1 Bit_30:=QMANOP; VSTATUS1 Bit_14:=not used;
VSTATUS1 Bit_29:=QMANLOP; VSTATUS1 Bit_13:=not used;
VSTATUS1 Bit_28:=QLOCOP; VSTATUS1 Bit_12:=not used;
VSTATUS1 Bit_27:=QON2OP; VSTATUS1 Bit_11:=not used;
VSTATUS1 Bit_26:=QON1OP; VSTATUS1 Bit_10:=not used;
VSTATUS1 Bit_25:=QOFFOP; VSTATUS1 Bit_09:=not used;
VSTATUS1 Bit_24:=QMONITOR; VSTATUS1 Bit_08:=not used;
VSTATUS1 Bit_23:=QMSG_SUP; VSTATUS1 Bit_07:=PLC CPU monitoring;
VSTATUS1 Bit_22:=QENSDCS; VSTATUS1 Bit_06:=Reset;
VSTATUS1 Bit_21:=QERR_RSD / QERR_WSD /
QERR_RCS; (Read/write Temporary/Permanent
error)
VSTATUS1 Bit_05:=REMON_OP;
VSTATUS1 Bit_20:=Not used; VSTATUS1 Bit_04:=QEM_START;
VSTATUS1 Bit_19:=Not used; VSTATUS1 Bit_03:=OverloadTest;
VSTATUS1 Bit_18:=Not used; VSTATUS1 Bit_02:=On2;
VSTATUS1 Bit_17:=not used; VSTATUS1 Bit_01:=O;
VSTATUS1 Bit_16:=not used; VSTATUS1 Bit_00:=On1;
SIMO_CHN Function
4.4Description of Parameters
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003 59
To Next Page
Loading...
Need help?
General
