Siemens SIMPRO-100 - Alias Settings for SER Reports; Alias Settings Definition

SIMPRO-100
SIMPRO-100 Relay Settings Sheets
F
PRIM-2400C 225
F.3.5 Antibackspin Setting
Antibackspin Starting Delay
Range: 0 – 60 min
ABSDLY =
[0]
F.3.6 Factory Logic Settings
Use Factory Logic Settings
Range: Y, N
FACTLOG =
[Y]
F.4 Serial Port Settings
(Serial Port Command SET P F or SET P R)
F.4.1 SET P Serial Port Settings
Protocol
(Hidden, Equal ASCII for Front Port)
Range: ASCII, MOD
PROTO =
[ASCII]
F.4.1.1 Protocol = ASCII
(Hidden when Protocol = MOD)
Baud Rate
Range: 300 – 19200
SPEED =
[2400]
Data Bits
Range: 7, 8
BITS =
[8]
Parity
Range: O, E, N
PARITY =
[N]
Stop Bits
Range: 1, 2
STOP =
[1]
Timeout
Range: 0 – 30 min
T_OUT =
[15]
Send Auto Messages to Port
Range: Y, N
AUTO =
[N]
Enable Hardware Handshaking
Range: Y, N
RTSCTS =
[N]
Fast Operate Enable
Range: Y, N
FASTOP =
[N]
F.4.1.2 Protocol = MOD
(Hidden when Protocol = ASCII)
Baud Rate
Range: 300 – 19200
SPEED =
[2400]
Parity
Range: O, E, N
PARITY =
[N]
Modbus
®
Slave ID
Range: 1 – 247
SLAVEID =