Siemens SIMPRO-100 - Typographic Conventions; SIMPRO-100 Relay Models; Table 1.1 SIMPRO-100 Relay Models

1
Introduction & Specifications
SIMPRO-100
20 PRIM-2400C
Appendix A: "Firmware Versions", page 135
Describes how to retrieve the firmware
version information from the relay.
Appendix B: "Control Equations & Relay
Logic", page 137
Discusses the relay word, control equations,
motor stop logic and start logic, local and
remote control switches, and front-panel
display configuration; provides tables
detailing all Relay Word bits and their
definitions.
Appendix C: "Modbus
™
RTU
Communications Protocol", page 159
Describes the Modbus protocol support
provided by the SIMPRO-100 Relay.
Appendix D: "SIMPRO-PC Compatibility
Features", page 189
Describes commands implemented to
support the SIMPRO-PC software.
Appendix E: "Motor Thermal Element",
page 205
Contains a fundamental description of the
SIMPRO-100 Relay’s thermal element.
Describes interpretation of % Thermal
Capacity and Thermal Capacity Used to Start
quantities.
Appendix F: "SIMPRO-100 Relay Settings
Sheets", page 213
Contains completed relay settings sheets
containing factory default settings and blank
settings sheets you can photocopy and
complete to record settings for the
SIMPRO-100 Relay.
1.2 Typographic
Conventions
Typing conventions used throughout this manual:
Otter
Commands you type.
<Enter>
Computer keys you press.
{Enter}
Relay front-panel buttons you press.
[Set Relay – Front Port]
Front-panel menu functions that should be
selected in sequence.
SIMPRO-100 Relay
Relay serial port command responses.
1.3 SIMPRO-100 Relay
Models
This instruction manual covers the SIMPRO-100
Relay models listed in Table 1.1.
Table 1.1 SIMPRO-100 Relay Models
For more information on creating a SIMPRO-100
Relay order number, Section 1.7, page 22. When
differences between the SIMPRO-100 Relay
models in Table 1.1 are explained, model
numbers are referenced for clarity.
SIMPRO-100
Relay Part
Number
Internal
RTD Inputs
Voltage
Inputs
Current
Inputs
1010000X No No IA, IB, IC, IN
1010010X 11 No IA, IB, IC, IN
1010001X No Wye or Delta IA, IB, IC, IN
1010011X 11 Wye or Delta IA, IB, IC, IN