•
IEC 60870-5-103
This profile also integrates the devices into the substation automation systems SINAUT LSA and SICAM.
•
Profibus DP
This protocol of automation technology allows transmission of indications and measured values.
•
Modbus ASCII/RTU
This protocol of automation technology allows transmission of indications and measured values.
•
DNP 3.0
This protocol of automation technology allows transmission of indications and measured values.
•
It is also possible to provide an analog output (2 x 20 mA) for output of measured values.
Introduction
1.2 Application Scope
20 SIPROTEC 4, 7VE61 and 7VE63, Manual
C53000-G1176-C163-3, Edition 10.2017
To Next Page
Loading...
