Siemens SIRIUS 3RK3 - Page 362

DS92 (device messages)
Byte Meaning Note 3RK3 Basic 3RK3 Advanced
3RK3 ASIsafe
Error cat‐
egory
DP error
number
Error cat‐
egory
DP error
number
49
0
ASIsafe code tables missing ASIsafe code tables are missing. In
addition, the (lowest) AS-i address
is entered in byte 50
‑ ✓
49
1
Multiple ASIsafe code tables More than one ASIsafe code table
exists. In addition, the (lowest) AS-
i address is entered in byte 50.
‑ SPF F24, F19
49
2
ASIsafe code tables new A new correct code sequence was
received for at least one AS-i F
slave. In addition, the (lowest) AS-i
address is entered in byte 50.
‑ ✓
49
3
ASIsafe code tables known Code tables have been taught and
stored in the memory module.
‑ ✓
49
4
ASIsafe 8x4-bit code se‐
quence error
Error occurred while evaluating in‐
put slaves. In addition, the AS-i ad‐
dress is entered in byte 50.
‑ SF, SPF F24, F19
49
5
ASIsafe code table teaching
active
ASIsafe code table teaching active ‑ ✓
49
6
... 49
7
Reserved = 0
50 AS-i address with 8x4-bit
code sequence problem
Lowest AS-i address in which an
8x4-bit code sequence problem
occurred. Code sequence prob‐
lems are:
Priority 1: ASIsafe code tables mul‐
tiple byte: 49
1
Priority 2: ASIsafe 8x4-bit code se‐
quence error byte: 49
4
Priority 3: ASIsafe code tables miss‐
ing byte: 49
0
Priority 4: ASIsafe code tables new
byte: 49
2
‑ ✓
51
0
ASIsafe 7x4-bit code se‐
quence error
Error in 7x4-bit code sequences
(MSS 3RK3 as safety-related AS-i
output). In addition, the AS-i ad‐
dress is entered in byte 52.
‑ SF, SPF F24, F19
51
1
... 51
7
Reserved = 0
52 AS-i address with 7x4-bit
code sequence problem
A problem has occurred on a safe‐
ty-related AS-i output
‑ ✓
53 ... 57 Reserved = 0
System interface: (SC = system interface)
58
0
SC bus error Communication error SF, BF F24, F19 SF, BF F24, F19
58
1
SC parameterization error Error occurred during the transfer
of parameters to expansion mod‐
ule.
✓ BF ‑
Diagnostics / service
7.11 Description of the diagnostic data sets
SIRIUS 3RK3 Modular Safety System
362 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006