SKF MKU Series User Manual

14
ENEN
Vor Önen der Haube
Switch o voltage before
Avant d'ouvrir le couvercle
Spannung ausschalten.
removing the cover.
coupez la tension.
951-110-270
1. Safety instructions
1.12 Warning labels on the product
The following information labels are affixed
to the product. Before commissioning,
check that the labels are present and intact.
Immediately replace warning labels if da-
maged or missing. The product must not
be operated until then. See the positioning
diagram for the order number and position
on the product.
Warning label, item 1
WARNING
Order No.: 951-110-270
Positioning of warning labels, Fig 1
Item 1
1.11 Referenced documents
In addition to this manual, the following
documents must be observed by the
respective target group:
o Operational instructions/approval rules
o Instructions from suppliers of purchased
parts
o Manual for the insulation resistance
tester
o Safety data sheet of the lubricant/equip-
ment used
o Project planning documents and other
relevant documents
For pumps with control unit:
- Control unit: IG38-30-I or IZ38-30-I
Operating instructions: 951-180-000-EN
- Control unit: IGZ36-20-S6-I or
IG54-20-S4-I
Operating instructions: 951-180-001-EN
The operator must supplement these do-
cuments with applicable regulations for the
country of use. The documentation must
be included if the product is transferred to a
new operator.
Vor Önen der Haube
Switch o voltage before
Avant d'ouvrir le couvercle
Spannung ausschalten.
removing the cover.
coupez la tension.
951-110-270

SKF MKU Series Specifications

General

Brand	SKF
Model	MKU Series
Category	Water Pump
Language	English