86
NOTE
Only fill using clean lubricant and an
appropriate device. Contaminated lubricants
lead to system malfunctions. The customer's
lubricant reservoir must be filled without
introducing bubbles.
NOTE
Observe the instructions from the machine
manufacturer regarding the lubricants that
are to be used.
NOTE
Property damage due to mixing of
different lubricants
It is recommended that an indication of
the lubricant in use be attached to the
lubricant reservoir in order to prevent
accidental mixing of lubricants.
7.1 Operation
The product described here functions au-
tomatically. The lubricant transport in the
lubrication lines should, however, be subjected
to regular visual inspection.
The lubricant fill level in the lubricant reservoir
should be subjected to visual inspection on
a regular basis. If the lubricant fill level is too
low, lubricant needs to be topped up.
7.2 Temporary shutdown
The described product can be temporarily
shut down by disconnecting the electrical
and/or hydraulic supply connections. The
instructions in the "Assembly" chapter in
these assembly instructions must be
observed when doing so.
If the product is to be shut down for an
extended period of time, follow the
instructions in the Chapter "Transport,
delivery, and storage" of these assembly
instructions.
To recommission the product, follow the
instructions in the Chapter "Assembly" in the
assembly instructions.
EN
7. Operation/decommissioning and disposal
7. Operation/shutdown and disposal
To Next Page
Loading...
Need help?
General
