90
9. Malfunctions, causes, and remedies
The following tables provide an overview
of possible malfunctions and their causes.
Contact the SKF Service department if you
cannot remedy the malfunction.
NOTE
Only original SKF spare parts may be used.
Unauthorized alterations to products and
the use of non-original spare parts and
accessories are prohibited.
WARNING
System pressure
Lubrication systems are
pressurized during operation.
Lubrication systems must therefore
be depressurized before starting
assembly, maintenance or repair
work, or any system modifications
or system repairs.
WARNING
Hot surface
The hot surface of a motor may
cause burns. Motor surfaces may
only be touched with appropriate
gloves or after the motor has been
shut off for an extended time.
9.1 Prior to beginning troubleshooting
If the gear pump unit does not pump, first
check the customer’s power supply. Only
after the power supply has been verified and
there are no system-related malfunctions
outside of the pump should you search for
and resolve the source of the error on the
pump in accordance with Chapter 9.2.
NOTE
Dismantling of the product is prohibited
and voids any claims.
Defective products must be replaced. Only
SKF Service is capable of repairing them.
EN
9. Malfunctions, causes, and remedies
To Next Page
Loading...
Need help?
General
