2
EN
EC Declaration of Incorporation
EC Declaration of Incorporation according to Machinery Directive 2006/42/EC, Annex II Part 1 B
The manufacturer SKF Lubrication Systems Germany GmbH , Berlin Motzener Strasse 35/37, DE - 12277 Berlin hereby declares that the partly completed
machinery:
Designation: Gear Pump Unit with reservoir
Type: MKU (F) (L) 1 (2) (5)-... ; MKU11-...
Part no.: MKU (F) (L) 1 (2) (5)-... ; MKU11-...
Year of construction: See type identification plate
complies with the following basic requirements of the EC Machinery Directive 2006/42/EC at the time when first being launched in the market.
1.1.2 · 1.1.3 · 1.3.2 · 1.3.4 · 1.5.1 · 1.5.6· 1.5.8 · 1.5.9 · 1.6.1 · 1.7.1 · 1.7.3 · 1.7.4
The special technical documents were prepared following annex VII part B of this directive. Upon justifiable request, these special technical documents can be
forwarded electronically to the respective national authorities. The person empowered to assemble the technical documentation on behalf of the
manufacturer is the
head of standardization; see manufacturer‘s address.
Furthermore, the following directives and harmonized standards were applied in the respective applicable areas:
2011/65/EU RoHS II
2014/30/EU Electromagnetic compatibility | Industry
Standard Edition Standard Edition
Standard Edition Standard Edition
DIN EN ISO 12100 2011 DIN EN 60947-5-1 2010
DIN EN 61000-6-2 2006 DIN EN 61000-6-4 2011
DIN EN 809 2012 DIN EN 61131-2 2008 Amendment 2011 DIN EN 60947-5-1 2010
DIN EN 60204-1 2007 Amendment 2009 DIN EN 61000-6-3 2011
Amendment 2010 DIN EN 60034-1 2015 Amendment 2012
DIN EN 50581 2013 DIN EN 61000-6-1 2007
The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with
the provisions of the EC Machinery Directive 2006/42/EC and any other applicable directives.
Berlin 2015/20/04
To Next Page
Loading...
Need help?
General
