SKF MKU Series User Manual

73
2
3
1
EN
3. Delivery, returns, and storage
EN
Do not top load /
This side up
Keep dry
Handle with care, Do not
drop
3.3.2 Electronic and electrical devices
o Dry and dust-free surroundings, storage
in well ventilated dry area
o Storage time: max. 24 months
o Relative humidity: < 65%
o Storage temperature: +10°C - +40°C
o No direct sun or UV exposure
o Protected against nearby sources or heat
or cold
3.3.3 General notes
o The product(s) can be enveloped in plastic
film to provide low-dust storage
o Protect against ground moisture by
storing on a shelf or wooden pallet
o Bare metallic surfaces must be protected
using anti-corrosion agents Check cor-
rosion protection every 6 months and
reapply if necessary
o Motors must be protected from mechanical
damage Do not store motors on the fan
cowl
3. Delivery, returns, and storage
Immediately after receipt, the delivery must
be checked for completeness according
to the shipping documents. Any transport
damage must be reported to the transport
company immediately. The packaging
material should be preserved until any
discrepancies are resolved.
o Dry and dust-free surroundings, storage
in well ventilated dry area
o Storage time: max. 24 months
o Relative humidity: < 65%
o Storage temperature: +10°C - +40°C
o No direct sun or UV exposure
o Protected against nearby sources or heat
or cold
3.1 Checking the delivery
3.2 Returns
WARNING
Personal injury/property damage
Do not drop the product.
3.3 Storage
3.3.1 Lubrication units
The following conditions apply to storage:
Before return shipment, all parts must be
cleaned and properly packed (i.e., accor-
ding to the requirements of the recipient
country). There are no restrictions for land,
air, or sea transport.
The following must be marked on the
packaging of return shipments:

SKF MKU Series Specifications

General

Brand	SKF
Model	MKU Series
Category	Water Pump
Language	English