89
8
The maintenance intervals are determined
depending on the specific conditions of the
application.
The criteria are machine-specific settings
such as lubricant quantity, ambient and
operating conditions, and the purity of the
lubricant used.
Due to these conditions, the customer
defines and maintains the maintenance
intervals.
If the reservoir has been emptied, the entire
system must be ventilated after refilling
(assembly instructions, Chapter
4.15).
Component Check Operating
hours
System • Visually inspect the bearing’s lubrication
System/pump • Regularly inspect system components for leaks
Pump • Inspect electrical cables for damage
• Inspect electrical connections and contacts
• Inspect fill level (lubricant reservoir)
System/pump • Check the shelf life of the lubricant
8.2 Maintenance schedule
Maintenance intervals vary depending on the system and are affected by environmental
factors such as dust and heat. The maintenance intervals are therefore defined by the
system manufacturer.
The purity of the lubricants used is the
decisive factor in the service life of the
gear pump unit.
8.3 Service
If you encounter problems or have any
questions, please contact our sales and ser-
vice centers or our representatives abroad.
A list with current addresses is available on
the Internet at:
www.skf.com/lubrication
EN
8. Maintenance
To Next Page
Loading...
Need help?
General
