SKF MKU Series User Manual

88
EN
8. Maintenance
8. Maintenance
WARNING
Electric shock
De-energize the product prior to
beginning work.
Electrical connections for the
product may only be established
by qualified personnel authorized
to do so by the operator. The
electrical operating conditions and
local regulations (e.g., DIN, VDE)
must be observed.
WARNING
Hot surface
The hot surface of a motor may
cause burns. Motor surfaces may
only be touched with appropriate
gloves or after the motor has been
shut off for an extended time.
SKF products are low-maintenance. All
connections and fittings must be regularly
inspected for proper seating to ensure
proper function. If necessary, the product's
exterior can be cleaned using mild cleaning
agents that are compatible with the product's
materials (non-alkaline, non-soap).
For safety reasons, the product must be
disconnected from the power supply. Do not
allow any cleaning agent to enter the interior
of the product during cleaning.
The interior of the product does not need to
be cleaned.
The interior of the product must be cleaned
if incorrect or contaminated lubricant is ac-
cidentally filled into the product.
Contact the SKF Service department if this
occurs.
NOTE
Only original SKF spare parts may be used.
Unauthorized alterations and the use of
non-original spare parts and accessories
are prohibited and nullify the statutory
warranty.
NOTE
Only fill with clean grease. The purity of the
lubricants used is the decisive factor in the
service life of the pump and the lubricated
machinery elements.
Only fill grease via the filler socket.
Dismantling of the product or individual
parts thereof within the statutory warranty
period is prohibited and voids any claims.
8.1 General

SKF MKU Series Specifications

General

Brand	SKF
Model	MKU Series
Category	Water Pump
Language	English