16
ENEN
1. Safety instructions
Residual risk Remedy
Life cycle: Malfunction, troubleshooting, maintenance, repair
Electric shock due to defective power lead/
mains plug
• Inspect the power lead/mains plug for damage before starting the product
Electric shock from open electric motor or
active energized components
• Disconnect the mains plug (cut power) before performing any work on electrical components.
• Exercise caution when winding and unwinding the power lead and when operating the
product
Strong heating of the electric motor due
to a motor jam or continuous duty
• Turn off the pump motor and let it cool down. Remedy the cause
People slipping due to floor contamination
with spilled/leaked lubricant
• Exercise caution when undoing or connecting the product’s hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/spilled lubricant
• Follow operational instructions for handling lubricants and contaminated parts
Life cycle: Decommissioning, disposal
People slipping due to floor contamination
with spilled/leaked lubricant
• Exercise caution when disconnecting the product’s hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/spilled lubricant
• Follow operational instructions for handling lubricants and contaminated parts
Environmental contamination by lubricants
and wetted parts
• Dispose of contaminated parts according to the applicable legal/company rules
To Next Page
Loading...
Need help?
General
