8
EN
Instructions placed on a unit, machine, or
equipment, such as:
o Rotation arrow
o Fluid connection labels must be followed
and kept in fully legible condition.
o Warnings
Explanation of symbols and signs
Abbreviations and conversion factors
Abbreviations
re regarding oz. ounce
approx. approximately psi pounds per square inch
°C degrees Celsius hp horsepower
s seconds lb. pound
dB (A) sound pressure level sq.in. square inch
i.e. that is cu.in. cubic inch
etc. et cetera mph miles per hour
poss. possibly fpsec feet per second
< less than °F degrees Fahrenheit
± plus or minus fl.oz. fluid ounce
> greater than in. inch
e.g. for example gal. gallon
if necessary if necessary
etc. et cetera
Conversion factors
usually usually Length 1 mm = 0.03937 in.
Ø diameter Area 1 cm² = 0.155 sq.in.
incl. including Volume 1 ml = 0.0352 fl.oz.
K Kelvin 1 l = 2.11416 pints (US)
kg kilogram Mass 1 kg = 2.205 lbs
RH relative humidity 1 g = 0.03527 oz.
kW kilowatt Density 1 kg/cm³ = 8.3454 lb./gal.
(US)
l liter 1 kg/cm³ = 0.03613 lb./cu.in.
Min. minute Force 1 N = 0.10197 kp
max. maximum Speed 1 m/s = 3.28084 fpsec
min. minimum 1 m/s = 2.23694 mph
mm millimeter Acceleration 1 m/s² = 3.28084 ft./s²
ml milliliter Pressure 1 bar = 14.5 psi
N Newton Temperature °C = (°F-32) x 5/9
Nm Newton meter Power 1 kW = 1.34109 hp
To Next Page
Loading...
Need help?
General
