90
Scope Multimeter Getting Started
Secondary Coil Adapter Lead (optional)
Figure 8-7 Secondary Coil Adapter lead
The optional Secondary Coil Adapter lead (Figure 8-7) connects to the clip-on secondary wire
adapter, coil-in-cap adapter or coil-on-plug adapter to display secondary waveforms.
Secondary Ignition Clip-on Wire Adapter (optional)
Figure 8-8 Secondary Ignition Clip-on Wire Adapter
The optional Secondary Ignition Clip-on Wire Adapter (Figure 8-8) connects the Secondary Coil
Adapter lead to the vehicle Secondary wire to display ignition patterns.
Inductive RPM Pickup Adapter (optional)
Figure 8-9 Inductive RPM Pickup adapter
The optional Inductive RPM Pickup adapter (Figure 8-9) connects to the scope auxiliary jack of
the diagnostic tool with a DB9F plug. It can be used to trigger a waveform or display RPM. With
the Ignition Scope, the RPM Pickup connects to cylinder number one to establish the firing order.
To Next Page
Loading...
