snom technology AG • 105
[ SNOM 360 USER MANUAL V1.00 ]
the bootloader. “Never Update, Load settings only”: loads only settings from
settings server.
Setting URL: Enter the URL of the settings server from where
you would like to obtain the confi guration fi le to confi gure your phone.
Please read our white paper on “Mass deployment”, which is available on
our website.
Subscribe Confi g: The phone can subscribe to setting changes
delivered via SIP when this option is switched to “on”.
VLAN
ID and Priority: Enter your VLAN ID (0..4095) and Priority (0..7)
separated by a space (e.g. “128 5”). The fi rst number specifi es the VLAN
number the phone should be joining and the second number gives the
priority of this device.
Please be advised that the whole phone resides in the specifi ed
VLAN and that it can only be assigned to one VLAN at a time.
DEBUG
Syslog Server: Type in the host where a Syslog Server is running
to store the log messages coming from the phone.
6
To Next Page
Loading...
