Somat eDAQ
lite
14
I2773-4.4 en
•
When cleaning, ensure that no liquid gets into the equipment or connections.
Remaining dangers
The scope of supply and performance of the data acquisition system covers only a
small area of measurement technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of measurement technology in such a way as to minimize remaining
dangers. Prevailing regulations must be complied with at all times. There must be
reference to the remaining dangers connected with measurement technology. After
making settings and carrying out activities that are password-protected, you must
make sure that any controls that may be connected remain in safe condition until the
switching performance of the amplifier system has been tested.
In this manual, the following symbols are used to point out remaining dangers:
DANGER
Meaning: Maximum danger level
Warns of an imminently dangerous situation in which failure to comply with safety
requirements will result in death or serious bodily injury.
WARNING
Meaning: Dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements can result in death or serious bodily injury.
CAUTION
Meaning: Potentially dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements could result in death or serious bodily injury.
Meaning: Electrostatic sensitive devices
Devices marked with this symbol can be destroyed by electrostatic discharge. Please
observe the precautions for handling electrostatic sensitive devices.
Symbols pointing out notes on use and waste disposal as well as useful information:
NOTE
Points out that important information about the product or its handling is being given.
Meaning: CE mark
The CE mark enables the manufacture to guarantee that the product complies with the
requirements of the relevant CE directives (the declaration of conformity is available at
http://www.hbm.com/HBMdoc).
HBM: public
To Next Page
Loading...