Somat eDAQlite - 19 CE Compliance; Edaq Lite Hardware

I2773-4.4 en
225
Somat eDAQ lite
19 CE Compliance
The following section provides important notes on the CE compliance of the eDAQ lite
hardware and cables.
19.1 eDAQ lite Hardware
CAUTION
eDAQ lite systems are CE compliant with new hardware only. Do not remove any
CE-labeled component or modify a CE-labeled component from its original condition.
Never remove a CE compliant layer from its ring to be fitted into an older eDAQ
lite
ring. Do not disassemble individual layers. HBM cannot ensure the CE compliance of
any hardware that has been modified or mixed with older hardware.
The following diagram shows a representative CE compliant eDAQ lite system with
current modifications for identification.
Figure 19-1: Exploded diagram of an eDAQ lite system, showing all modifications for CE
compliance.
HBM: public