Somat eDAQ
lite
182
I2773-4.4 en
When viewing a table of channels, click on Plot in the plot column to view a simple plot
of the channel data as a function of time. Click the name of the channel in the name
column to view basic channel information and the actual data collected during the test
run.
9.6.2 SIF Test Data
Use the get SIF file option to transfer the SIF data file from the eDAQ
lite
to the PC.
The table lists the completed test runs with the date and time of the run. Clicking on
the test run opens a table of channels that displays the run number, channel number,
DataMode type, sample rate and number of data points. Click on the channel name to
view basic channel information and the actual data collected during the test run.
Currently Time History and message channels are the only data types viewable via the
web interface.
9.7 Custom Tab
Use the Custom tab to install custom modules, such as a serial bus module, in the
eDAQ
lite
system. See the installation instructions provided with the firmware
installation for information on specific modules.
When custom modules are installed in the eDAQ
lite
, the page displays a table with
the name and installation path of the module, the current status (enable or disabled)
and a list of operations available for the module (enable/disable and remove).
To discuss a custom module created specifically for your company’s needs, contact
your HBM sales representative.
9.8 Help Tab
The help tab contains links to help topics on using SIE data and vehicle buses.
HBM: public
To Next Page
Loading...