Viewing images recorded on a tape on your computer
(Windows users only)
Notes
• When you view images on your computer with the USB connection, the following
may occur. This is not a malfunction:
The image may fluctuate
The image may contain noise, etc.
The image does not appear properly if the TV color system used for the image signal
differs to the system used on your camcorder.
• When your camcorder is in the standby mode with a cassette inserted, it turns off
automatically after three minutes.
• We recommend setting DEMO MODE to OFF in the menu settings when your
camcorder is in the standby mode, and no cassette is inserted.
• Indicators in the camcorder LCD screen do not appear on images that are captured
into your computer.
if image data cannot be transferred by the USB connection
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Reinstall the USB driver
following the procedure on page 97.
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after quitting the application:
Disconnect the USB cable
Change the POWER switch setting or set it to OFF (CHG)
PIXELA ImageMixer Ver.l.0 for Sony" is provided with on-line help (operating
instructions).
(1) Click (_ button located in tile upper-right corner of tile screen.
The" ImageMixer's Manual" screen appears.
(2) You can access the desired topics from tile contents.
To close onqine help
Click [] located in the upper-right corner of the _ ImageMixer's Manual" screen.
If you have any questions about "PIXELA ImageMixer Ver.1,0 for Sony"
"ImageMixer Ver.l.0 for Sony" is a trademark of PIXELA corporation. Refer to tile
information web site at:" htt p://www.imagemixer.com".
Communications with your computer
Communications between your camcorder and your computer may not recover after
recovering from Suspend, Resume, or Sleep.
104
To Next Page
Loading...
