Warning indicators and messages
If indicators and messages appear on the screen or in the display window, check the
following.
See the page in parentheses" ( )" for more information.
Warning indicators
100-0001 Warning indicator as to file
(except DCR-TRV240)
Slow flashing:
• The file is corrupted.
• The file is unreadable.
• You are trying to use the MEMORY MIX
function on a moving picture (p. 131).
C:21:00 Self-diagnosis display (p. 184).
c\Q Warning indicator as to battery
Slow flashing:
• The battery is nearly dead.
The _ indicator sometimes flashes even if
the remaining battery time is about five to
10 minutes depending on the operating
conditions, environment and battery
condition.
Fast flashing:
• The battery is dead.
[] Moisture condensation has occurred*
Fast flashing:
• Eject the cassette, turn offyour camcorder,
and leave it for about one hour with the
cassette compartment open (p. 194).
_1 Warning indicator as to" Memory
Stick" * (except DCR4RV240)
Slow flashing:
• No" Memo(y Slick" is inserted.
E_] Warning indicator as to" Memory Stick"
formatting (except DCR-TRV240)
Fast flashing:
• "Memory Stick" data is corrupted (p. 116).*
• "Memory Stick" is not formatted correctly
(p. 111).
L_ Warning indicator as to tape
Slow flashing:
• The tape is near the end.
• No tape is inserted.*
• The write-protect tab on the cassette is
exposed (red) (p. 20).*
Fast flashing:
• The cassette has run out of tape.*
_-- You need to eject the cassette*
Slow flashing:
• The write-protect tab on the cassette is
exposed (red) (p. 20).
Fast flashing:
• Moisture condensation has occurred
(p. 194).
• The cassette has run out of tape.
• The self-diagnosis display function is
activated (p. 184).
o_ The image is protected*
(except DCR4RV240)
Slow flashing:
• The image is protected (p. 170).
i Warning indicator as to the flash
(optional)
Fast flashing:
• There is something wrong with the external
flash (optional).
* You hear the melody or bee F
-t
g
2r
8
_2
185