Recording video or TV programs
Using the A/V connecting cable
You can record a nape from another VCR or a TV program from a TV that has video/
audio outputs. Use your camcorder as a recorder.
Before operation
Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set tile POWER switch to VCR on your camcorder.
(3) Press • REC and the button on its right simultaneously on your camcorder,
then immediately press II on your camcorder.
(4) Press 1_ on the VCR to starl playback if you are recording a tape n-ore VCR.
Select a TV program if you are recording from TV.
The picture from a TV or VCR appears on tile screen of your cameorder.
(5) Press II on your camcorder at tile scene where you want to start recording
from.
g
13 l
PAUSE REC
OUT
@ S VIDEO
VIDEO
: Signal flow
AUDIO/
When you have finished dubbing a tape
Press • on both your camcorder and the VCR.
89
To Next Page
Loading...
