Viewing moving pictures
- MPEG movie playback
- Except DCR-TRV240
You can play back moving pictures recorded on a" Memol T Stick." You can also play
back six images including still images in order at a time by selecting the index screen.
DCR-TRV740/TRV840 only
The moving picture recorded on a" Memory Stick" is divided into 23 parts.
You can select any point and playback the picture with the SEL/PUSH EXEC dial.
Before operation
Insert a" Memory Stick" into your camcorder.
(1) Set tile POWER switch to MEMORY or VCR. Make sure that tile LOCK switch
is set to the left {unlock) position.
(2) Press MEMORY PLAY. The last recorded image is displayed.
(3) Press MEMORY +/ to select the desired moving pictures. To see tile previous
picture, press MEMORY . To see the next picture, press MEMORY +.
(4) Press MPEG _ II to start playback.
(5) To adjust tile volume, press either of the two bultons on VOLUME.
Press to turn the volume down.
Press + to turn the volume up.
3
£
o
To stop MPEG movie playback
Press MPEGIP_ II.
Note
You may not be able to play back images with your camcorcier:
When playing back image data modified on your computer.
When playing back image data shot with other equipment.
To play back recorded images on a TV screen
• Before operation, connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder.
• Turn the audio volume of the TV down before operation, or noise (howling) may be
output fi'om the TV speakers.
When no image is recorded on the _Memory Stick"
The message" _ NO FILE" appears.
When recording time is not long
The moving picture may not be divided into 23 parts. (DCR-TRV740/TRV840 only) 153
To Next Page
Loading...
