Sony Digital 8 DCR-TRV340 - Function

Using the fader function
(1) When fading in [a]
In tile standby mode, press FADER until tile desired fader indicator flashes.
When fading out [b]
In tile recording mode, press FADER until the desired fader indicator flashes.
The indicator changes as follows:
FADER --+ M.FADER --+ BOUNCE --* MONOTONE •
no indicator ,,_ DOT *-- WIPE *_- OVERLAP *J
The last selected fader mode is indicated first of all.
(2) Press START/STOP. The fader indicator stops tlashing.
After fade in/out ends, your camcorder automatically returns to the normal
mode.
<
8
g
e_
o
©
13
=o
To cancel the fader function
Before pressing START/STOP, press FADER repeatedly until the indicator disappears.
Notes
• The overlap, wipe and dot functions work only for tapes recorded in the Digital8 [}
system.
• You cannot use the following functions while using the fader function. Also, you
cannot use the fader function while using the following functions:
Digital effects
Color Slow Shutter
Super NightShot
Photo recording
Interval recording
Frame recording
When you select OVERLAP, WIPE, or DOT
Your camcorder automatically stores the picture recorded on tape. While the picture is
being stored, tile indicators flash fast, and the picture from the tape appears on the
screen. At this stage, tile picture may not be recorded clearly, depending on the tape
condition.
45