Using the PROGRAM AE function
(1) In CAMERA or MEMORY (except DCR-TRV240) mode, press MENU m
display the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select PROGRAM AE in 8, then press tile
dial.
(3) Turn the SEL/PUSH EXEC dial to select the desired mode.
2
MENU
To cancel the PROGRAM AE function
Set PROGRAM AE to AUTO in tile menu settings.
Notes
• Because your camcorder is set to focus only on subjects in tile middle to far distance,
you cannot take close-ups in the following modes:
Spotlight
Sports lesson
Beach & ski
• Your camcorder is set to focus only on distant subjects in the following modes:
Sunset & moon
Landscape
• The following functions do not work in the PROGRAM AE mode:
Color Slow Shutter
Slow shutter
OLD MOVIE
BOUNCE
• While setting NIGHTSHOT to ON, the PROGRAM AE function does not work. (The
indicator flashes.)
• The PROGRAM AE {'unction does not work in the Color Slow Shutter mode.
If you are recording under a discharge tube such as a fluorescent lamp, sodium
lamp or mercury lamp
Flickering or changes in color may occur in the following modes. If this happens, turn
the PROGRAM AE {'unction off.
Soft portrait
Sports lesson
52
To Next Page
Loading...
