Copying images recorded on " Memory
Stick" s to tape
- Except DCR-TRV240
You can copy still images recorded on" Memory Stick" s and record them to tapes.
Before operation
• Insert a tape for recording into your camcorder.
• Insert a" Memory Stick" into your camcorder.
(1) Setthe POWER switch to VCR.
(2) Using tile video control buttons, search a point where you want to record the
desired still image. Set tile tape to playback pause mode.
(3) Press • RECand the button on its right simultaneously on your camcorder.
Tile tape isset to the recording pause mode.
(4) Press MEMORYPLAY.The last recorded image is displayed.
(5) Press MEMORY+/ to select the desired image.
To see tile previous image, press MEMORY . To see the next image, press
MEMORY+.
(6) Press II to start recording and press II again to stop.
• appears on tile screen during recording.
(7) Ifyou have more to copy, repeat steps 4 to 6.
li-ll
o11
REC'_I
•
PAUSE
To stop copying
PressI.
164
To Next Page
Loading...
