Playing back tapes with digital effects
During playback, you can process a scene using the following digital effect functions:
STILL, FLASH, EUMI. and TRAIL.
(1) In the playback mode, press MENU to display tile menu settings.
(2) Turn SEL/PUSH EXEC dial to select D EFFECT in _l_, then press the dial.
(3) Turn SEL/PUSH EXEC dial to select tile desired digital effect mode, then press
tile dial.
Tile bars appear on the screen.
In the STILL or LUMI. mode, tile picture is captured and is stored in memory
as a still image at tile time you press tile SEL/PUSH EXEC dial.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 48.
MENU
4
To cancel the digital effect
Set DEFFECT to OFF in the menu settings.
Notes
• Digital effect functions work only for tapes recorded in the Digital8 [_ system.
• You cannot process externally input scenes using digital effect functions.
• You cannot record images on a tape on your camcorcler when you have processed the
image using digital effect functions. However, you can record images on a" Memory
Stick" (oxcept DCR-TRV240) (p. 135, 142), or on a VCR using your camcorder as a
player.
Pictures processed by digital effect functions
Pictures processed by digital effect functions are not output through the _ DV IN/OUT
jack.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function is automatically canceled.
64
To Next Page
Loading...
