Preventing accidental erasure
- Image protection
- Except DCR-TRV240
You can protect selected images, to prevent accidental erasure of important images.
Before operation
Insert a" Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that tile LOCK switch
is set to the left (unlock) position.
(2) Play back the image you want to protect.
(3) Press MENU to display tile menu settings.
(4) Turn the SEE/PUSH EXEC dial to select PROTECT in [tEl, then press tile dial.
(5) Turn the SEE/PUSH EXEC dial to select ON, then press tile dial.
(6) Press MENU to make tile menu settings disappear. The _ mark is displayed
beside tile data file name of tile protected image.
4
To cancel image protection
Select OFF in step 5, then press the SEE/PUSH EXEC dial.
Note
Formatting erases all information on the" Memory Slick", including the protected
image data. Belbre formatting a" Memory Stick" , check its contents.
[f the write-protect tab on the "Memory Stick" is set to LOCK
You cannot protect images.
170
To Next Page
Loading...
