Step 1 Preparing the power supply
Note
Prevent metallic objects from coming into contact with the metal parts on the DC plug
of the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
When the battery pack is charged fully
The LCD backligbt of the display window is turned off'.
Remaining battery time indicator
The remaining battery time indicator in the display window roughly indicates the
recording time when recording using the viewfinder.
Until your camcorder calculates the actual remaining battery time
min" appears in the display window.
While charging the battery pack
No indicator appears or the indicator flashes in the display window in the following
cases:
The battery pack is not installed correctly.
Something is wrong with the battery pack.
If the power may go off although the remaining battery time indicator indicates
that the battery pack has enough power to operate
Charge the battm2¢ pack fully again so that the indication on the remaining battery time
indicator is correct.
When you use the AC power adaptor
Place the AC power adaptor near a wall outlet. If any trouble occurs with this unit,
disconnect the plug from the wall outlet as soon as possible to cut off the power.
Recommended charging temperature
We recommend charging the battery pack in an ambient temperature of between 10°C
to 30°C (50_F to 86°F).
What is" InfoLITHIUM" ?
The" InfoLITHIUM" is a lithium ion battery pack that can exchange data such as
batlery consumption with compatible electronic equipment. This unit is compatible
with the "InfoLITHIUM" battery pack (M series). Your camcorder operates only with
the" InfoLITI-{IUM" battery. "InfoLITHIUM" M series battery packs have the
(i_w 0 mark.
"InfoLITHIUM" is a trademark of Sony Corporation.
14
To Next Page
Loading...
