Step 1 Preparing the power supply
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open tile DC IN jack cover, and connect tile AC power adaptor to the DC IN a
jack on your camcorder with ttle plug's • mark facing up.
(2) Connect tile power cord to tile AC power adaptor.
(3) Connect tile power cord to a wall outlet.
PRECAUT}ON
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has heen turned off.
Notes
• The AC power adaptor can supply power even if the hattery pack is attached to your
camcorder.
• The DC IN jack has" source priority". This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
Using a car battery
Use Sony Car Battery Adaptor (optional).
17
To Next Page
Loading...
