Sony DNW-A75 - Page 221

B-7
DNW-A75/A75P
525/60
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
311: ANALOG AUDIO EDIT PRESET REPLACE FOR CH1 CH 1
312: ANALOG AUDIO EDIT PRESET REPLACE FOR CH2 CH 2
313: ANALOG AUDIO EDIT PRESET REPLACE FOR CH3 NODEF
314: ANALOG AUDIO EDIT PRESET REPLACE FOR CH4 NODEF
317: AUDIO EDIT MODE CROSS
318: EDIT RETRY ON
319: PREREAD SELECT A/V
320: DIGITAL AUDIO PB PROCESS ON EDIT POINT FADE
326: AUTOMATIC IN ENTRY AFTER AUTO EDIT OFF
334: EE REFERENCE CONTROL NORM
ITEM-400 series: Preroll parameter
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
401: FUNCTION MODE AFTER CUE-UP STOP
402: TIME REFERENCE FOR PREROLL CTL
403: AUTOMATIC PREROLL REFERENCE ENTRY DIS
405: CUE-UP BY CTL CAP
ITEM-500 series: Tape protection parameter
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
501: STILL TIMER 8M
502: TAPE PROTECTION MODE FROM SEARCH STEP
503: TAPE PROTECTION MODE FROM STOP STDBY
504: DRUM ROTATION IN STANDBY OFF OFF
505: STILL TENSION NORM
ITEM-600 series: Time code generator parameter
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
601: VITC POSITION SEL-1 16H
602: VITC POSITION SEL-2 18H
603
*
: ID CODE PRESET OFF _____
604: ID CODE SW OFF
605: TCG REGEN MODE TC&UB
606: TC OUTPUT SIGNAL IN REGEN MODE TAPE
607: U-BIT BINARY GROUP FLAG 000
608: PHASE CORRECTION OFF
609: TCG CF FLAG OFF
610: REGEN CONTROL MODE AS&IN
616: SDTI-CP OUTPUT LTC OVERRIDE DIS
(When BKNW-124 is used only.)
*: ITEM-603 is no relation with Bank.