Sony DNW-A75 - 4-2. TAPE Maintenance Mode (M0)

4-6
DNW-A75/A75P
TAPE MAINTENANCE MODE
C0 : SERVO/DT CHECK
C1 : RF CHECK
C2 : AUDIO/VIDEO CHECK
C3 : BETACAM PB CHECK
A0 : SERVO/DT ADJUST
A1 : RF ADJUST
A2 : AUDIO/VIDEO ADJUST
A3 : BETACAM PB ADJUST
A4 : MECHANISM ADJUST
*
4-2. TAPE Maintenance Mode (M0)
4-2-1. Overviews
The TAPE maintenance mode is used for the maintenance and check.
This unit has the nine submodes below.
TAPE Maintenance Mode
4-2. TAPE Maintenance Mode (M0)
4-2-1. Overviews