4-29
DSR-70/70P
(2) DVCAM EQ ADJ
Move the cursor to “DVCAM EQ ADJ” which is displayed with a
white background using the [ENTRY] (↑), [AUTO|EDIT]
(↓) keys.
1. Press the [OUT] (→) key to enter the adjustment mode.
2. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “E”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select PHASE with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
3. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “E”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select COS with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
4. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “E”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select AGC with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
To Next Page
